Resetting maintenance counter for Lexmark X738 or X748 printers

After you install a new photoconductor, please reset the maintenance counter. Use one of the procedures below.

Replace or low message appears

Use the steps below after you replace a photoconductor and 84 Replace <color> photoconductor, 84 <color> photoconductor nearly low, or 84 <color> photoconductor low appears:

1. On the home screen, tap Status/Supplies.
2. Tap Supply Replaced.
3. When Replaced <color> photoconductor appears, tap Yes.

If you replace more than one photoconductor, you need to repeat steps 1 through 3. When Ready appears the counter is reset.

Replace or low messages do not appear

Use the steps below steps after you replace a photoconductor and a replace or low message does not appear:

1. On the home screen, tap the key icon.
2. Tap Menus.
3. Tap Supplies Menu.
4. Tap Replace Supplies.
5. Tap the button for the item you replaced:
   
   • All
   • Cyan Photoconductor
   • Magenta Photoconductor
   • Yellow Photoconductor
   • Black Photoconductor
6. When <color> photoconductor replaced appears, tap Yes.
7. Tap the Home button to return to the home screen.